Brief introduction: Parameters:
DT desulfurization pump is a specially developed product for desulfurization and denitration process of power plant. It is suitable to be used as limestone Slurry Pump,filtrate pump,gypsum slurry discharge pump,drainage pump...The hydraulic models of DT desulfurization pump is optimized designed by D,and its passage is designed under the theory of abrasion of slurry pump.The wetted parts material for DT desulfurization pump is an anti-abrasive and anti-corrosive material which was developed by Zigong Pump itself.
- Flow rate:Q=10~1920 (m³/h)
- Total head:H=15~75 (m)
- S.g.:γ ≤1.5
- Pump diameter:25~300mm
- Pump passage is designed under the theory of abrasion of slurry pump,which has an optimized structure and high efficiency.
- Horizontal bracket structure with big loading capacity.
- Achievable of multi-point weak current monitoring.
- Transmission: Direct coupled,V-belt drive,variable frequency drive,hydraulic coupling.
- Single casing structure enables the easy disassembly.
- Various anti-abrasion materials for different applications.
- Single stage and cantilever type anti-abrasion pump.
- Single casing structure with back pull design.
- Different sealing types to meet the requirements of different applications.
- The standard pump discharge is vertical,and up horizontal and bottom horizontal discharge are also available.
Desulfurization large slurry Pump
We are professional manufacturer for Desulfurization large slurry Pump, our Desulfurization large slurry Pump is with high and stable quality, and we have made many water pump solutions for many customers.
wide application scope
long life span
anti-abrasive & anticorrosive
DT(TL) type desulfurization pump is carefully designed high effective new generation desulfurization pump, widely used as large scale serosity circulating, lime slurry transportation,plaster slurry ejection, collection etc.
DT(TL) desulfurization pump adopt horizontal single stage,single suction and bracket structure.
serosity PH : 2.5 ~ 13
density of chlorin ion ≤60000 ppm
Density of weight ≤60%
media temperature ≤ 120°c
DT (TL) desulfurization pump
capacity: 4m3/h ~10200m3/h
head: 4.4m ~70.8m
power: 0.55kw ~ 800kw
Product Description Biref introduction:
D flue gas desulfurization pump was elaborately designed to meet the requirements of wet process D of limestone(lime) and gypsum for coal fired power plants.The hydraulic models of D desulfurization pump is optimized designed by D,and its passage is designed under the theory of abrasion of slurry pump.The wetted parts material for D desulfurization pump is an anti-abrasive and anti-corrosive material which was developed by Zigong Pump itself. The biggest diameter of D series is 900 mm at present, and it is widely used in the flue gas desulfurization and denitration process of power plant and other environment protection projects. Parameters:
- Flow rate:Q=700~14000 (m³/h)
- Total head:H=15~63 (m)
- S.g.:γ ≤1.5
- Pump diameter:300~900mm
- Elaborately designed based on the characters of flue gas desulfurization of thermal power plant to meet the requirements of a facility below 1000 MW.
- Hydraulic models are D optimized to have excellent performance of anti-cavitation.
- Specially designed mechanical seal for flue gas desulfurization process.
- The impeller position can be adjusted by the bearing housing,this brings a shortcut to recover the pump performance under a slightly abrasion.
- Axial adjusting structure to maintain the distance between impeller and front cover plate to keep a high efficient operation.
- The specially designed anti-corrosive and anti-abrasive duplex stainless white iron for D process,which has the advantages of both duplex stainless steel and white anti-abrasive iron alloy.
- All metal materials for pump set,without any lining rubber or other high polymer material.
- Pump casing adopts duplex stainless steel of 2605N and 2205,which have excellent resistant performance of chloride ions and sulfate ions,and therefore is the first choice of desulfurization pumps.
- Front and back open structure,the rotary part can be removed from the casing without dismantling the pipelines.
- Cartridge mechanical seal with internal or external flushing plans.
- The bearing part is back pull structure,which is assembled in the bearing housing.
- Transmission: directly coupled and gear box drive.
Looking for ideal Centrifugal Chemical Self-Priming Pump
Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the China Ztd Series Desulfurization Slurry Circulat are quality guaranteed. We are China Origin Factory of Desulfurization Large Slurry Pump DT/DTL. If you have any question, please feel free to contact us.
Product Categories : Centrifugal Slurry Pump