- Product Detail
- Product Tags
- Buyer Reviews
We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for Irrigation Water Pump,Hot Water Circulation Pump,Industrial Electric Water Pump. Sincerely sit up for serving you in the in the vicinity of future. You are sincerely welcome to visit our corporation to talk organization face to face with each other and build long-term co-operation with us!
Double Suction Diesel Dewatering Water Pump Description:
High Flow Rate Horizontal Split Case Double Suction Centrifugal Water/Sewage Pump is used for conveying water or the physical and chemical properties similar to water and other liquids, is transported liquid temperature shall not be higher than 80 DEG C, suitable for factories, mines, urban water supply, power stations, agricultural irrigation and water conservancy.
Double Suction Diesel Dewatering Water Pump Characteristic:
Compact structure,beautiful outline,stable operation,low noise;
Both inlet and outlet of this pump are placed under the axial line,so it is unnecessary to remove the inlet and outlet pipeline and motor;
The shaft seal of water pump has fine mechanical seal and soft stuffing seal,which can be selected according to different condition by user;
The impeller is static-balance calibrated,fixed on the shaft with round nut,and its axial position can be adjusted via the round nut;
The pump is direct drived by motor via resilient coupling,it can be drived by internal combustion engine if it is necessary.
Double Suction Diesel Dewatering Water Pump General:
Inlet Diameter: 150-800mm
Rotation Speed: 970-2950r/min
Clean water and other liquids that their physical and chemical property is similar to clear water, solid contents don't exceed 80mg/l; It can pump industrial corrosive waste water, seawater and rainwater including suspend substance etc, when adopting special material.
The split-casing centrifugal pump is horizontal, the pump case is horizontal on the shaft axial, the up parts is the pump cover, the down parts is the pump casing, the suction and the discharge are all under the axial, its centerline is perpendicular to the axis.It can open the pump cover and take out the rotor parts without disassembling the inlet and outlet pipes when overhauling. The shaft sealing is the soft packing sealing or the mechanical sealing.
The rotation direction:
Viewed from motor, the direction of the pump is anti-clockwise,that is the suction in the left, the discharge in the right.
The rotating direction of the type xxxS-xx pump is clockwise, that is the suction in the right, the discharge in the left.
Also can move the driver to another edge according to the user requires. Then, the rotating direction, the suction and discharge direction is in the opposite as the described above.
The main parts materials:
The materials of the flow parts is the casting iron, the impeller can be the casting steel and the brass if in need, but should remark in the contract.
So that you can finest fulfill client's demands, all of our operations are strictly performed in line with our motto "High Excellent, Competitive Price, Fast Service" for Large Flow Rate Double Suction Water Pump. The product will supply to all over the world, such as: Venezuela,Mongolia,Panama. We are looking forward to establishing cooperative relationships with you. Please contact us for more information.
Email To This Supplier